Panasonic LP-GS Series Setup & Maintenance Manual page 136

„ Example of operations to change the character data to mark
Start the code reader and laser marker
Start up and online connect the Laser Marker NAVI smart
During remote mode control
During RUN mode operation
Remote mode ON Marking target file selection
Select File Laser pumping ON
Laser pumping ON RUN mode ON
Shutter open Shutter open (automatic)
Read out the code that indicates the marking characters
Check the marking ready output ON
Repeat this procedure
Marking trigger input
Laser radiation
• Confirm the laser marker and code reader communication settings in advance.
• Specify the object number to transfer the character data in the system settings screen in advance.
136
ME-LPGS-SM-8