Connection - Panasonic LP-GS Series Setup & Maintenance Manual

6-1-3 Connection

• To prevent damage of the image checker, do not install the camera in the laser emission area. Besides, take measures
to protect the camera against the reflected laser beam, such as installing a shutter in front of the camera lens.
„ Connectable image checker
Image checkers compatible with this product are listed below.
Usage
Position correction
Code checking
Character checking
Image capturing and inspection
„ Connection method
Use the Ethernet port on the laser marker controller and connect the image checker to link.
This product can be connected with one device each for position correction and code reading.
• For details of specifications and connection of the Ethernet port, refer to "5-3 Ethernet" (P.112).
„ Connection example
To connect a position correction device (PV230), code reader (DataMan) and control PLC with the laser marker
PLC
(For I/O control)
Example of communication system settings
To prevent duplication of IP addresses of network devices, set individual addresses.
IP address
Subnet mask
Default gateway
Port
• Port on the laser marker side is a fixed value when PV230/PV200 is used.
• Align the Port (command transmission) on the laser marker with DataMan's TelnetPort setting value when DataMan is
used.
• When the laser marker is connected an image checker one to one, no HUB is necessary.
• The Ethernet port of this product is compatible with both straight cable and cross cable.
120
Model
PV230/PV200
PV230
LP-ABR series
DataMan series (Ethernet supported model)
PV230
PV230/PV200
Laser marker
Laser marker
(For position correction)
192.168.1.4
―
(Command transmission: 8604)
ME-LPGS-SM-8
HUB
PV230
(For position correction)
PV230
192.168.1.5
255.255.255.0
192.168.1.1
Fixed value
(Result output: 8601)
Manufacturer name
Panasonic Devices SUNX Co, Ltd.
Cognex Corporation
Panasonic Devices SUNX Co, Ltd.
DataMan
(For code reading)
DataMan
(For code reading)
192.168.1.10
23 (Telnet)