Select File - Panasonic LP-GS Series Setup & Maintenance Manual

4-6-6 Select file

ON
SELECT 0 - 2 IN
(No.19-21)
OFF
ON
D0 - D15 IN (No.3-18)
OFF
ON
SET IN (No.2)
OFF
ON
TRIGGER IN (X5)
OFF
ON
SET OK OUT (No.28)
OFF
ON
READY OUT (Y5)
OFF
ON
PROCESSING OUT (Y10)
OFF
Item Time
T1 0.5ms or more
T2 0ms or more
T3 2 to 510ms
T4 ―
T5 2ms or more
T6 0ms or more
*1 : Turn off SELECT 0 IN to SELECT 2 IN when you specify a file number.
*2 : You can input the next file number during the trigger processing. If the trigger processing was being executed when
you turned on SET IN (No.2), the file number changes after the trigger processing completes.
*1
File
number A
T1
T2
T3
T4
Remarks
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN to
D15 IN, turn on SET IN (No.2).
Keep the input until SET OK OUT (No.28) turns on.
One-shot output. Set the output time on the system settings screen. There is a small
margin of error for the setting value.
• In the laser pumping completed and shutter opened state: Time for marking data
creation. It varies depending on the quantity of the setting data.
• When the laser pumping is not completed and shutter is closed: Total time for shutter
opening and marking data creation, or time for laser pumping, whichever is longer.
Keep the ON status for 2ms or more.
To input the next file number right after TRIGGER IN (X5), input SET IN (No.2) after
PROCESSING OUT (Y10) turns ON.
ME-LPGS-SM-8
File
number B
T1
T5
File number A
ready
File
number A
T6
*2
T2
T3
File number B
T4
ready
99