Time/Date Hold Input And Date Gap Output; Counter End Output - Panasonic LP-GS Series Setup & Maintenance Manual

4-6-7 Time/date hold input and date gap output

Actual date
Example: at 15 o'clock of day 1
TIME HOLD IN (No.22)
TRIGGER IN (X5)
PROCESSING OUT (Y10)
READY OUT (Y5)
DATE GAP OUT (No.29)
• TIME HOLD IN (No.22) is available even when the remote mode is turned OFF.
• If TIME HOLD IN (No.22) is turned ON when powering on the laser marker, it retains the system startup time.
• While TIME HOLD IN (No.22) is turned on, the time will be retained regardless of the file number, remote mode ON/OFF
status, or error status.
• If you turn on/off TIME HOLD IN (No.22) continuously, keep the OFF time at least for two seconds.

4-6-8 Counter end output

READY OUT (Y5)
TRIGGER IN (X5)
PROCESSING OUT (Y10)
COUNT END A/B/C/D OUT
(No.30/31/32/33)
Item Time
T1 2ms or more
• Assign the counter No. to COUNT END A OUT to COUNT END D OUT (No.30 to 33) in system settings of Laser Marker
NAVI smart.
• COUNT END A/B/C/D OUT remains turned ON with the shutter open until the next marking trigger is input. When you
close the shutter, COUNT END A/B/C/D OUT turns OFF.
• COUNT END A/B/C/D OUT is disabled when "counter update per step" is configured at Step & repeat.
100
Day 1
ON
OFF
ON
OFF
ON
Mark
retained time
OFF
(15 o'clock of day 1)
ON
OFF
ON
OFF
ON
OFF
ON
T1
OFF
ON
OFF
Mark the counter end value
ON
OFF
Remarks
Keep the ON status for 2ms or more.
ME-LPGS-SM-8
8 o'clock of day 2
Mark
retained time
(15 o'clock of day 1)
Date change
T1 T1
Day 2
(Mark 8 o'clock of day 2)
T1