Guide Laser Radiation Input - Panasonic LP-GS Series Setup & Maintenance Manual

4-6-5 Guide laser radiation input

Supported model: LP-GS051(-L)
SHUTTER ENABLE IN (X9)
SHUTTER IN (X8)
SELECT 0 - 2 IN (No.19-21)
GUIDE IN (No.23)
READY OUT (Y5)
SHUTTER OPEN 1 OUT (Y8)
SHUTTER OPEN 2 OUT (Y9)
Item Time
T1 Max. 1 sec.
T2 0ms or more
T3 0.5ms or more
T4 Max. 60 sec.
*1 : Select the indication contents of the guide laser with SELECT 0 IN to SELECT 2 IN as follows.
Radiation details
Work distance
Marking image
Marking field
Masked objects
*2 : Keep the input state of SELECT 0 IN to SELECT 2 IN (No.19-21) while GUIDE IN (No.23) is turned ON.
• The guide laser radiation is possible even when any of LASER STOP 1 IN (X10), LASER STOP 2 IN (X11), INTERLOCK
1 (X16, X17), INTERLOCK 2 (X18, X19) of the I/O terminal block are open.
• If you have configured the guide laser control method of external control to communication commands by the system
settings of Laser Marker NAVI smart, the guide laser radiation by I/O is not possible.
• Do not execute any other operation while the guide laser is emitted.
• For LP-GS052 type, guide laser cannot be controlled using I/O or communication command.
98
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON (Open)
OFF (Close)
Remarks
There is a delay time of around 200ms to max. 1 second from turning ON/OFF of
SHUTTER IN (X8) to turning ON/OFF of SHUTTER OPEN 1 OUT (Y8) and SHUTTER
OPEN 2 OUT (Y9).
SHUTTER OPEN 1 OUT and SHUTTER OPEN 2 OUT will be output by the same
operation, but their output timing has a margin of error.
Turn on GUIDE IN (No.23) with the shutter closed.
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN, turn on
GUIDE IN.
The guide laser is stopped automatically after passing 1 minute from start-up.
SELECT 0 IN (No. 19)
OFF
ON
OFF
ON
ME-LPGS-SM-8
*1
T3
T2
T1
SELECT 1 IN (No. 20)
OFF
OFF
ON
ON
*2
T4
SELECT 2 IN (No. 21)
OFF
OFF
OFF
OFF