Set The Laser Marker Overall File Conditions - Panasonic LP-GS Series Setup & Maintenance Manual

6-1-5 Set the laser marker overall file conditions

Set the overall file conditions of the Laser Marker NAVI smart according to the type of the system to establish.
1.
Connect the laser marker and Laser Marker NAVI smart online.
2.
Select Marking settings screen in the screen
selection menu and click "File settings" tab to
show the setting items.
3.
Turn ON "Image checking before marking" and
"Image checking after marking" depending on
the functions to use.
• When you use the link control with an image checker,
"continuous trigger" of trigger mode is not available.
4.
Select the model of the image checker and
application.
For image checking before marking:
• Model: PV230/PV200 (fixed)
• Application: Marking position correction (fixed)
For image checking after marking:
• Model: PV230/PV200, DataMan, LP-ABR
• Application: Code checking, Character checking, Image capturing and inspection
• The application of the image checking before marking is fixed to "Marking position correction".
• If you use DataMan or LP-ABR for the image checking after marking, the application is fixed to "Code checking".
• If you use PV200 for the image checking after marking, the application is fixed to "Image capturing and inspection".
• If you use PV230 for code checking, the human readable text can be also checked with a code symbol.
5.
Set the TIMING IN signal input.
Set whether to use the TIMING IN signal as the
operation start method of each device for link control.
• Using TIMING IN signal: Input the operation trigger of
each device separately.
• Not using TIMING IN signal: Perform a set of link
controls by one marking trigger input.
Refer to "Details of TIMING IN signal" (P.124).
122
ME-LPGS-SM-8