I/O Interface Specification - Panasonic LP-GS Series Setup & Maintenance Manual

4-1 I/O Interface Specification

The I/O terminal block and the I/O connector are available as the external control I/O interface of this product.
• I/O terminal block: Loaded with the basic input/output to control the laser marker.
• I/O connector: Loaded with the input/output for data configuration such as selecting a file number and the input/output
for the specific functions.
• Before using I/O, configure the system settings. Refer to "3-4-3 Settings before external control" (P.64).
Hook
The I/O terminal block can be
removed by holding down the
hooks.
„ Connector specifications and models
Connector position
I/O terminal On the laser
block marker side
User side
I/O Connector On the laser
marker side
User side
„ Wiring the shielded line
If you use a shielded wire for the I/O terminal block and the I/O connector cable, you can use the frame ground terminal on
the rear of the controller as the frame earth of the shielded wire.
X1 Y1
X2 Y2
X3 Y3
X4 Y4
X5 Y5
X6 Y6
X7 Y7
X8 Y8
X9 Y9
X10 Y10
X11 Y11
X12 Y12
X13 Y13
X14 Y14
X15 Y15
X16 Y16
X17 Y17
X18 Y18
X19 Y19
X20 Y20
I/O terminal block
Connector specifications
Dedicated connector
MIL connector
40-pin/male
MIL connector
40-pin/female
Rear of controller
Frame ground terminal
Rear of controller
Model
DMC1.5/20-GIF-3.5-LR
P20THR
Accessories: DFMC1.5/20-ST-
3.5-LR
XG4A-4034
Recommended item: XG4M-
4030-T
Shielded wire
ME-LPGS-SM-8
1 2
39 40
I/O connector
(Laser marker)
Manufacturer name
Phoenix Contact
Company
OMRON Corporation
69