Setting Of Code Reader Linkage Functions - Panasonic LP-GS Series Setup & Maintenance Manual

6-2-5 Setting of code reader linkage functions

For use of the code reader linkage function, set the following items in the Laser Marker NAVI smart system settings screen.
1.
Connect the laser marker and Laser Marker NAVI smart online.
2.
Select "System settings" from the Screen selection menu, and click the "Communication" tab.
3.
Select the usage and communication settings of RS-232C.
Set "Code reader" to the RS-232C
usage.
Specify these values according to
communication settings of the code
reader to connect.
• For the code reader linkage function, the following items of communication settings are fixed values. Align the code
reader side settings with this setting.
• Start code: None
• Checksum: OFF
• End code: CR
4.
Select types of data to be controlled by the
code reader linkage function.
• File switching by name
• File switching by number
• Character transmission
• File switching and character data transmission cannot be used at the same time.
ME-LPGS-SM-8
139