Maintenance Items - Panasonic LP-GS Series Setup & Maintenance Manual

7-1 Maintenance Items

Listed below are typical parts that require cleaning or replacement depending on the usage environment or duration of
service of the laser marker.
Some parts are maintainable by the customer, and other parts are required to be repaired or replaced by our service
representative, depending on the types of parts and the defects.
For purchasing replacement parts or requesting our service representative to repair or replace parts, contact our sales
agency.
Head
r
u
y
q
No. Parts name
Laser emission port (f θ lens)
q
Air filter
w
Air-cooling fan
e
Laser oscillator
r
Galvano scanner
t
Z-axis adjustment module *1
y
Internal shutter
u
Battery inside the controller
i
Fuse
o
Cable
1)
*1 : Note that Z-axis adjustment module is not attached to models with "-L" in the model code.
• Be sure to use our specified replacement parts. If the user applies any other fuses than the specified one, failure might
result.
142
e
w
t
Main cause for
Daily maintenance
degradation
Contamination Cleaning
Contamination Cleaning
Contamination Cleaning
Aging Check output power
Aging ―
Aging ―
Aging ―
Aging ―
Blown ―
Broken ―
ME-LPGS-SM-8
Controller
Front
w
i
Replacement when degraded or
defective
By our service representatives
Customer-replaceable
Customer-replaceable
By our service representatives
By our service representatives
By our service representatives
By our service representatives
Customer-replaceable
Customer-replaceable
Customer-replaceable
Rear
o
e
1)