3-1 Mark date and time
Set the functional characters to mark the automatically updated date and time. The procedures to set the current time are
given below.
Example
13 29
hour
minute
• Functional characters such as current date and time or lot are based on the system clock of the laser marking system.
It may happen that the system clock deviates from the accurate time due to errors of internal parts or low battery level.
Therefore, check the system clock in the laser marking system regularly to ensure that the date and time are correct.
38
Item
Number of characters
Date/time type
Zero indication
ME-NAVIS2-QR-1
Setting
2
Hour (24), Minute
Zero fill