Specifications; Particulars; Installation Date - H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List

ELECTRO FREEZE Soft Serve Model GEN-2080
3

Specifications

3.1

Particulars

Always check and verify voltage and amperage on the data
plate located on the back panel of each freezer.
GEN-2080 Combination Soft Serve and Shake Freezer
Width (in/cm)
Height (in/cm)
Depth (in/cm) 36.5 / 93
Weight (lbs/kg) 852 / 408
Compressors
Beater Motor 2 HP / 1.5 kw
Refrigerant
Charge
Mix Container
Cylinder
3.2

Installation Date

Fill in the date of installation, and the name, address, and phone number of the
installer in the space provided below. This information will be needed when ordering
parts or service for the GEN-2080 Freezer.
Date of installation:
4
26 / 66
70 / 178 (Air Cooled Models)
67.5 / 172 (Water and Air Cooled Remote Models)
Soft Serve
2 HP / 9500 BTU
1.5 kw (Motor)
2.8 kw (Cooling)
1 .5 HP / 1.1 kw
404a
3.75 lb. / 1.7 kg
30 qts. / 28.4 L
4 Qts. / 3.8 L
___________________________________
Installed by: ___________________________________
Address: ___________________________________
___________________________________
Phone: ___________________________________
Shake
2 HP 12000 BTU
1.5 kw (Motor)
2.8 kw (Cooling)
404a
3.75 lb. / 1.7 kg
28 qts. / 26.5 L
9 Qts. / 8.51 L
185240