H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 75

ELECTRO FREEZE Soft Serve Model GEN-2080
16 Routine Maintenance
To protect the unit during seasonal shutdown, it is important to store the
GEN-2080 Combination Soft Serve/Shake Freezer properly. Please use
the following procedures:
with a warm, mild detergent solution. Rinse in clear water and dry all parts
thoroughly.
assembly, and pump parts in a safe, dry place.
other elements that could contaminate them while in storage. Place the
freezer in a dry location.
authorized service technician.
The water valve must be opened in order to blow out the condenser.
Failure to purge the freezer of water can result in severe damage
to the refrigeration system. Call your Electro Freeze Distributor for
service.
compressed air to blow out all remaining water in the condenser.
replace all O-rings and seals with new parts. Rubber parts can lose their
elasticity and ability to seal when they are stored.
USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT PARTS WITH THIS FREEZER.
Should you have any questions on items that are not included in this maintenance schedule, or
problems where service assistance is needed, please call your local Electro Freeze Distributor or
H. C. Duke & Son, LLC. Electro Freeze Service Department, for factory service at (309) 755-4553
or (800) 755-4545.
185240
Winter Storage
1. Disconnect all power to the freezer.
2. Disassemble and wash all parts that come into contact with the mix
3. Store the loose parts, such as the head assembly, beater
4. Do not lay heavy objects on the plastic or rubber parts.
5. Cover the freezer and all loose parts to protect them from dust or
6. On air-cooled freezers, have condenser fins cleaned by an
7. On water-cooled freezers, disconnect the water supply. Use
8. When freezer is restarted after seasonal shutdown, remember to
(See your Illustrated Replacement Parts Manual)
(continued)
Important:
65