H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 23

ELECTRO FREEZE Soft Serve Model GEN-2080
4 Part Names and Functions
The following descriptions apply to figure 4-3. The number preceding the part
name corresponds to the number in the figure.
1.) SUPPORT-ROLLER BEARING:
Holds roller assembly in place.
2.) SHOE-ROLLER: Provides an
opening to insert the mix transfer
hose. Squeezes transfer hose
against rollers.
3.) ROLLER ASSEMBLY COMPLETE:
Squeezes mix/air through tubing to
freezing cylinder.
4.) KNOB-HAND: Locks roller shoe in
position.
5.) CLAMP-SHOE: Swings hand knob
into position over roller shoe.
6.) RETAINER-AIR TUBE: Holds air
meter tube in the "up" position.
7.) AIR METER: Regulates the amount
of air being drawn into the system.
8.) TUBE-AIR: Provides connection for
the air meter.
9.) CLAMP - ASSY. SOFT HOSE 5/8":
Prevents mating parts from leaking.
10.) HOSE - ASSY. MIX BRAIDED:
Connecting tube between the Mix
Transfer System and the cylinder
inlet.
11.) COVER - MTS: Protection against
moving parts. Cover must be in
place for the MTS to operate.
185240
12.) HOSE - TRANSFER RED: Special
"red-lined" hose that is squeezed by
rollers to transfer mix to freezer.
13.) TUBE-ASSEMBLY MIX INLET:
Carries mix from mix container to
MTS.
14.) DUCKBILL: A rubber check valve
that prevents mix from falling back
into the mix container.
15.) PORT - AIR/MIX: Blends air and
mix as it flows into the transfer
hose.
16.) CLIP - TUBE RETAINER: Locks
mix pickup tube into air/mix port.
17.) O-RING: Seals the mix tube in the
air/mix port.
13