H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 74

ELECTRO FREEZE Soft Serve Model GEN-2080
16 Routine Maintenance
SEMIANNUALLY
1. Contact your Electro Freeze distributor
to replace drive belts.
2. On air cooled and air cooled remote
freezers have your Electro Freeze distributor
check the condenser fan motor oil.
3. Have the gear reducer oil changed by
your Electro Freeze distributor.
NOTE: Under normal conditions, after the
initial change, the oil should be changed
after every 2500 hours of operation or
every six months, whichever occurs first.
64
(continued)
ANNUALLY
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are
in the "OFF" position and
that the main power source
is disconnected. Some
freezers have more than one
disconnect switch.
1. Call your Electro Freeze
Distributor for service to replace drive
belts and lubricate fan motor as needed.
2. Call your Electro Freeze
Distributor to clean the inside of the
freezer including base, side panels,
condenser, etc.
3. Call your Electro Freeze
Distributor to check water-cooled
condensers and flush clean to remove
scale and deposits if necessary.
185240