ELECTRO FREEZE Soft Serve Model GEN-2080
9.2
Disassembly Instructions
13. Remove MTS hose assembly
from the Mix Transfer System as follows
(figure 9-5):
a. remove cover,
b. loosen the hand knob,
c. swing back the shoe clamp,
d. swing open the roller shoe,
e. loosen the clamp on braided
f. pull the braided hose off the
cylinder inlet and slide the mix transfer
hose assembly out of the roller support
housing.
Figure 9-5 MTS
36
hose,
— Shake (continued)
14. Disassemble the MTS
hose assembly as shown in
figure 9-6.
Figure 9-6 MTS Hose Assembly
185240