Disassembly And Cleaning - Shake - H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List

ELECTRO FREEZE Soft Serve Model GEN-2080
9.1 Cleaning Accessories
The following accessories shipped with the freezer are necessary for cleaning,
sanitizing, and disassembly/assembly (Figure 9-1):
1.) HC158005 BRUSH: 6 inch diameter
with 36 inch handle used to clean the
shake cylinder.
2.) HC158019 BRUSH: 9/16 inch
diameter 30 inches long used to clean
drain tube, the mix feed tube in the
ceiling of the cabinet and the pickup
tube.
3.) HC158037 BRUSH: 1/4 inch diameter
18-1/2 inches overall length used to
clean the air meter hose, the small
hole in the back of the dispense head
and small parts.
4.) HC158018 BRUSH: 7/16 inch
diameter 12 inches long used to clean
transfer hose, braided hose, and the
air relief opening in the dispense
head.
3
4
5
Figure 9-1 Cleaning Accessories
185240
— Shake
1
2
6
5.) HC158026 BRUSH: 1 inch diameter
12 inches long used to clean the
disassembled shaft seal and bushing.
6.) HC169374 TOOL - O-RING
REMOVAL: Aids in removing O-rings
from plunger, head, air relief plug, and
spindle.
7.) HC158000A: LUBRICANT -
PETROL-GEL. Approved lubricant
for moving parts and O-rings.
8.) HC116588 KIT - O-RING: Contains
all O-rings and seals needing
replacement on a regular basis.
(not shown)
7
33