H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 71

ELECTRO FREEZE Soft Serve Model GEN-2080
16 Routine Maintenance -
1. Clean the mix transfer system:
If the transfer hose is assembled
improperly or replacement has been
neglected, it may be necessary to clean
mix from the MTS due to hose failure.
If this happens frequently the MTS should
be removed for complete cleaning.
swing clamp and open shoe to gain
access to the hose cavity.
Figure 16-1
185240
AS NEEDED
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the "OFF" position and that
the main power supply is
disconnected. Some freezers
have more than one disconnect
switch.
Important:
a. Remove cover, loosen
(continued)
CAUTION
Make sure the freezer
is depressurized before
proceeding.
b. Remove mix transfer
hose assembly.
c. Lay a towel on the
cabinet base below the MTS.
d. Using the spray bottle
supplied, flush the hose cavity and
roller assembly.
e. Use a brush (supplied)
to clean in between rollers. Flush
with sanitizer.
f. Wipe all surfaces with a
clean dry cloth.
g. Remove and clean
shoe. See figure 16-1.
61