H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 27

ELECTRO FREEZE Soft Serve Model GEN-2080
5 Part Names and Functions
The following descriptions apply to figure 5-2. The number preceding the
part name corresponds to the number in the figure.
1.) BLADE - SCRAPER: Scrapes the
frozen product from the freezing
cylinder wall.
Shake blades have 3 holes and are
not interchangeable with the 2 hole
soft serve blades. If the incorrect
blades are used the freezer could be
damaged.
2.) SHAFT - BEATER: Rotates in the
freezing cylinder, blending air and mix
and ejecting product.
3.) O-RING-SHAFT SEAL: Seals the
beater shaft to the shaft seal. Is
inserted into the shaft seal washer.
Must be lubricated.
4.) WASHER-SHAFT SEAL: Holds the
shaft seal o-ring. Lightly lubricate
the side opposite the cup seal.
5.) SEAL(CUP)-BEATER SHAFT: Seals
the opening between the freezing
cylinder and the beater shaft. Do not
lubricate rubber cup portion.
185240
Important:
— Shake
17