H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 65

ELECTRO FREEZE Soft Serve Model GEN-2080
13.3 Dispensing Shakes
Make sure each person dispensing
shakes reads the following instructions
before attempting to use the freezer.
Following these instructions will produce a
well blended, old-fashioned style shake.
1. Pour the required amount of
flavoring in the bottom of the cup. Firmly
hold the cup and place the mixer spinner
inside the cup all the way to the bottom.
2. Pull the handle down toward you
as far as possible. Slowly lower the cup
as it fills with product. DO NOT open
and close the handle while filing the cup.
Always keep the spinner blade about on
inch in the product.
3. When the cup is full, close the
handle while lowering the cup and remov-
ing the spinner blade from the product,
allowing the product to spin off on the top
inside of the cup.
4. If additional mixing is required use
the manual push button (See figure 13-2 .
Your shake is now ready to serve.
185240
CAUTION
Rotating metal shaft. To
avoid injury, use only paper
or plastic mixing containers.
Contact between shaft and
metal containers or malt
collars can cause shaft to
wear and break.
CAUTION
To avoid injury, never place a
towel or any other material on
the rotating shaft to clean
Figure 13-2
.
55