H.C Duke & Son Electro-Freeze Genesis Series Operator’s Manual With Illustrated Parts List page 19

ELECTRO FREEZE Soft Serve Model GEN-2080
4 Part Names and Functions
The following descriptions apply to figure 4-1. The number preceding the
part name corresponds to the number in the figure.
1.) HEAD: Encloses the freezing
cylinder and provides an opening for
product to be dispensed.
2.) NOZZLE: Shapes the frozen
product as it is dispensed.
3.) KNOB-HAND: Secures the
dispensing head to the freezing
cylinder.
4.) HANDLE-DISPENSE: Opens and
closes the plunger to start and stop
the flow of product from the freezer.
5.) PIN-HANDLE: Secures the handle
to the dispense head.
6.) O-RING-PLUG: Seals the air bleed
plug in the dispense head.
7.) PLUG-AIR BLEED: Seals the air
bleed opening in the head when
closed. Allows excess air to be
removed from the cylinder in the
filling process.
8.) ROD-PLUNGER: Starts the freezer
when dispensing. Must be in place
before freezer will operate.
9.) PLUNGER: Seals the product
opening in the head when closed.
Allows product to flow when open.
10.) O-RING-PLUNGER-UPPER: Seals
the plunger in the dispensing head.
Must be lubricated to seal and slide
properly.
11.) O-RING-PLUNGER-LOWER: Seals
the plunger in the dispensing head.
Must be lubricated to seal and slide
properly.
12.) O-RING-HEAD: Seals the
dispensing head to the freezing
cylinder. Must be lubricated.
185240
— Soft Serve
9