Technical Terms And Abbreviations; Revision History - Siemens FS20 Commissioning, Maintenance, Troubleshooting

About this document
1

Technical terms and abbreviations

1.3 Technical terms and abbreviations

1.4 Revision history

Version Edition date
s 2016-06-02
r 2015-12-15
12 | 188
Building Technologies
Fire Safety
Term Explanation
BDV Base data variant
ES Product version
FDnet Addressed detector line
FW Firmware
MCL Maintenance and commissioning link
'MCP' Abbreviation for 'Manual call point'
You will find details of further technical terms and abbreviations in the 'Glossary'
chapter.
See also
1 Applicable documents [➙ 11]
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Brief description
Chapter 'Locating wire breaks': Changed 'AnalogPLUS detector line' to 'interactive
detector line', moved chapter to the main chapter 'Changing and expanding the
interactive detector line'
Edition for MP6
New:
Converting a standalone station to a networked station
Commissioning Ethernet switch (modular) FN2012-A1
Updating the FW of the FN2012-A1 Ethernet switch (modular)
Freezing outputs
Enabling frozen outputs
'One step commissioning'
Switching off, Safety during switch-off, Switching on
Cyber security disclaimer
Network parameters
Fiber-optic network module FN2006 / FN2007 troubleshooting steps
009052_s_en_--
2016-06-02