Siemens FS20 Commissioning, Maintenance, Troubleshooting page 102

Commissioning security module (firewall) FN2009-A1
23
Creating firewall rules
102 | 188
Building Technologies
Fire Safety
3. Select the 'Firewall Settings' tab.
 The following window is displayed without entries:
4. Click on 'Add Rule' for each firewall rule you would like to create.
5. Select the corresponding settings and IP services from the dropdown list fields.
6. Enter the required IP addresses.
7. Confirm input with 'OK'.
 The firewall rules are created.
Loading the firewall rules to FN2009-A1
ϖ The firewall rules are created.
1. Highlight the FN2009-A1 module in the project.
2. Select the 'Transfer > 'To Module' menu item.
 The firewall rules are loaded to FN2009-A1.
009052_s_en_--
2016-06-02