Line Tester With Serial Interface Fdul221 - Siemens FS20 Commissioning, Maintenance, Troubleshooting

29.8.9 Line tester with serial interface FDUL221

Building Technologies
Fire Safety
This chapter relates to the line tester FDUL221, device version with RS232
connection, order no. up to A5Q00004397 02.
Preparation
ϖ The line tester is supplied via a mains adapter.
ϖ An RS232 port is available on the PC.
1. Select 'File' > 'Import new resource package'.
2. In the selection window, open the most recent file with the corresponding
language F-FXS2007-XX_x_x_...zip.
3. Connect the device to the PC via the RS232 interface in the battery
compartment.
FDUL221
Figure 13: Connect the PC to the serial line tester
FDUL221 Line tester
RS 232 Serial port for the direct connection to the PC
S Serial interface RS 232
DC Supply with network adapter DC 24 V / 625 mA
B Battery compartment
Updating the firmware
Check the COM port setting under 'Options' > 'Preferences' > 'Periphery update'
before performing the firmware update.
1. Select 'Update' > 'Periphery update wizard'.
2. In the 'Password check' window, enter the password '1234' and click on the
'Next' button.
3. In the 'Devices:' field, select the 'FDUL221 FDnet line test device'.
 The connection with the line tester is established.
Updating the FW of the peripheral devices
DC
RS 232
Updating the firmware
29
153 | 188
009052_s_en_--
2016-06-02