Specifications; Technical Data - Siemens FDM273-O Mounting

Specifications

4

Technical data

4 Specifications
4.1 Technical data
Device characteristics
Radio
Battery
Detector line
14 | 18
Building Technologies
Fire Safety
You will find information on approvals, CE marking, and the relevant EU directives
for this device (these devices) in the following document(s); see 'Applicable
documents' chapter:
Document A6V10431682
Detector diagnosis
Type of alarm activation
Sending/receiving aerials
Frequency range
Channel grid
Number of channels
Transmitting power
Range
¹ 2013/752/EU: according Official Journal of the European Union, COMMISSION
IMPLEMENTING DECISION of 11 December 2013 amending Decision
2006/771/EC on harmonisation of the radio spectrum for use by short-range
devices and repealing Decision 2005/928/EC (notified under document C(2013)
8776) (Text with EEA relevance)
Lithium battery pack
Battery service life
Service life 'Battery low'
Battery voltage monitored
Weight
Radio connection to detector line via
radio gateway
Radio connection to PC via MCL-USB
adapter
System compatibility
With Wireless diagnostic tool or connected
fire control panel
Type B (indirect activation)
Dual band aerial
433.05...434.79 MHz in band 44b and
45b ¹
868...870 MHz in band 48, 49, 50, 54b,
and 56b ¹
50 kHz
27 in 868-MHz band
20 in 433-MHz band
10 mW ERP in band 44b, 45b, and 49 ¹
Type 10 (max. 25) mW ERP in band 48,
50, 54b, and 56b ¹
See document A6V10425603
BAT3.6-10 LI-SOCl2 battery pack 3.6 V,
10 Ah
Dependent upon ambient conditions
At least 3 years
>3 months
Yes
0.093 kg
Radio gateway
FDUZ227
See 'List of compatibility'
A6V10425648_en--_f
2016-11-28