Installation manual
DAN-20057315
Procedure
1. Select Finish to write the configuration settings to the meter.
2. Save the meter configuration file, collect a Maintenance log and Waveforms to
4.3
Security seals for the meter
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the end caps and install
security wires, if required, on the Transmitter Electronics Enclosure end caps, the Bracket/
Cover cap head screws. See
Model 3418 GUSM
document the "As Left" settings.
Security seal installation
Configuration
and
Sealing the
unit.
June 2019
91