Security Seals For The Meter - Emerson Daniel 3812 Installation Manual

Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual
3-9000-765 Rev H
4.5

Security seals for the meter

For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches to the Shroud covering the
transducer assemblies and install security wires on the Transmitter Electronics Enclosure end
caps, the Base Enclosure hex head bolts, the Shroud clamps and the shroud latches
(see Section
Pour the conduit ports sealing compound according to the customer's requirements (e.g., after
approximately one to two weeks of run time). Also,
Security seals for the meter
3.7).
Section 4: Configuration
see Section 3.4.1 and see Section
June 2017
3.4.2.
103