Emerson Daniel 3410 Series Installation Manual page 21

Installation manual
DAN-20057315
Table 1-3: Daniel model 3418 meter specifications (part 2)
Power
Table 1-4: Transducers, mounts and holders
Transducer specifications
Transducer type
T-21
T-22
Model 3418 GUSM
1
2
Meter
• 10.4 VDC to 36 VDC
• 11 W power consumption (15 W maximum)
Serial cable
• Belden #9940 or equivalent (22 gauge)
— Capacitance (pF/m) 121.397 (conductor
to conductor)
— Capacitance (pF/m) 219.827 (conductor
to other conductor and shield)
— Resistance (DC) DCR @ 20° C
(recommended)
Ethernet cable
• Cat-5 Standard 100 Mbps
Frequency (see
• 22 AWG wire characteristics areas follows:
— Capacitance = 20 pF/ft or 20 nF/1000 ft
(between two wires)
— Resistance = 0.0168 Ohms/ft or 16.8
Ohms/1000 ft
— Pull-up voltages 24 VDC
Temperature range
-20° C to +100° C (-4° F to 212°
F)
-50° C to +100° C (-58° F to 212°
F)
Introduction
June 2019
(continued)
Table 1-2)
Mount and holder type
Standard mounts/Holders/NBR
O-ring
Inconel mounts/316L
Holders/NBR O-ring
Inconel Mounts/Inconel
Holders/FKM O-ring
Inconel Mounts/316L
Holders/FKM O-rings
Standard mounts/Holders/NBR
O-ring
Inconel mounts/316L
Holders/NBR O-ring
Inconel Mounts/Inconel
Holders/FKM O-ring
Inconel Mounts/316L
Holders/FKM O-rings
21