Emerson Daniel 3410 Series Installation Manual page 90

Configuration
June 2019
Table 4-1: Local display labels, descriptions and valid units
Local display labels, descriptions and valid units
AO1 — Analog Output 1 current
AO2 — Analog Output 2 current
Note
When connected to a meter with the local display option, reverse flow direction is
indicated with a minus sign (negative) before the value(s) shown on the local display.
4.2.2 Display units
The Meter volume units displayed are either U.S. Customary or Metric. To modify the
Display Units, configure the Meter units system in the Field Setup Wizard → General
Page.
• U.S. Customary volume unit selections are:
—
—
• Metric volume unit selections are:
—
• Display units preceded by a plus or minus sign indicate forward and reverse flow
direction.
• The local display Flow rate time units are modifiable by selecting the drop-down arrow
and clicking the time unit in the list box.
• Valid flow rate time units selections are:
—
—
—
4.2.3 Scroll delay
The Scroll Delay is the time interval for the selected display items to be shown on the Local
Display. The default scroll delay setting is five seconds. Click the spin box up or down arrow
to increase or decrease the length of time an item displays.
90
• CF – Cubic Feet
• CM –Cubic Meters
• MCF – Thousand Cubic Feet
• MCM –Thousand Cubic Meters
• MA – Milliamperes
• MA – Milliamperes
Cubic feet
Thousand cubic feet
Cubic meters
second
hour
day
Installation manual
DAN-20057315
(continued)
Installation manual