Piping Recommendations - Emerson Daniel 3410 Series Installation Manual

Mechanical installation
June 2019
2.3

Piping recommendations

BURST HAZARD
Before pipeline cleaning and maintenance ("pigging operations"), remove straightening
vanes or flow conditioners.
Failure to comply may cause excessive pressure in the meter system, resulting in death,
serious injury or equipment damage.
Figure 2-3: 3410 Series Gas Ultrasonic Flow Meter with flow conditioner for uni-
directional flow
Figure 2-4: 3410 Series Gas Ultrasonic Flow Meter with flow conditioner for bi-
directional flow
Sunshields, provided by the customer, may be required to prevent exceeding the
transmitter electronics maximum temperature when the meter is mounted in a location
with extremely hot climates.
SUNSHIELD PROTECTION
Install a sunshield to prevent prolonged exposure to direct sunlight in extreme climates.
Failure to shield the meter may result in exceeding the ambient temperature range and
damage transmitter electronics.
NOTICE
For optimal flow measurement conditions, Daniel suggests the piping configurations
below. Regardless of the configuration selected, the user agrees to accept full
responsibility for the site piping design and installation.
34
WARNING
CAUTION
Installation manual
DAN-20057315
Installation manual