Emerson Daniel 3410 Series Installation Manual page 43

Gas ultrasonic flow meters
Hide thumbs Also See for Daniel 3410 Series:
Table of Contents

Advertisement

Installation manual
DAN-20057315
Safety precautions using appropriate rated lifting slings
Procedure
1. Meters must only be lifted by personnel properly trained in the safe practices of
2. NEVER attempt to lift the meter by wrapping slings around the electronics
3. NEVER attempt to lift the meter using only one sling around the meter. Always use
4. Visually inspect the slings prior to use for any signs of abrasion or other damage.
5. Only use slings with ratings that exceed the weight to be lifted. Reference your
6. NEVER allow the slings to contact the electronics enclosure or the transducer
Model 3418 GUSM
rigging and lifting.
enclosure.
two slings wrapped around each end of the body as shown below. A choker style
sling is recommended.
Figure 2-12: Correct sling attachment
Refer to the sling manufacturer's procedures for proper inspection of the particular
sling you are using.
company's standards for safety factors that must be included when calculating the
load rating.
cabling. Damage to the meter may occur. If the slings do come in contact with the
electronics enclosure, then remove the two bolts holding the enclosure to its base
Mechanical installation
June 2019
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Daniel 3418

Table of Contents