Certifications And Approvals For The Daniel 3410 Series - Emerson Daniel 3410 Series Installation Manual

Gas ultrasonic flow meters
Hide thumbs Also See for Daniel 3410 Series:
Table of Contents

Advertisement

Introduction
June 2019
Electrical parameters: Refer to
engineering
Special conditions for safe use
Explosion proof joint dimensions are compliant with the Brazilian Association of
technical standard: ABNT NBR IEC 60079-1, Table 3.
The enclosure for the explosion proof transmitter and intrinsically safe barrier must be
remote mounted (refer to
C) (refer to
Cable length (refer to
EXPLOSION OR FIRE HAZARD
Conduit runs must have a sealing fitting within 18 inches (457 mm) of the enclosure to
reduce the risk of an explosion or a fire.
During operation, keep covers tight.
During equipment maintenance, disconnect power before opening transmitter or
base electronics. Clean cover joints before replacing.
DO NOT substitute meter components. Component substituting may compromise
the intrinsic safety.
Failure to comply may result in severe injury to personnel or cause damage to the
equipment.
1.10
Certifications and approvals for the Daniel
3410 series
Daniel 3410 Series Gas Ultrasonic Flow Meters have electrical, metrology, intrinsic safety
and Pressure Equipment Directive certifications and approvals by the agencies listed
below. Refer to the nameplate tag on the meter body, the wiring diagram (P/N
DMC-005324) in
Series Gas Ultrasonic Flow Meters operate within the pressure and temperature range of
the device (also see
Ultrasonic Flow Meters are approved to the ATEX Directive 94/9/EC.
Standards
US
Canada
Europe
26
drawings.
Table
1-3).
Table
WARNING
Engineering drawings
Meter specifications for 3418
Explosive Atmospheres (ATEX)
International Electrotechnical Commission (IECEx)
Pressure Equipment Directive (PED via BSI)
Electromagnetic Compatibility (EMC)
Meter specifications for 3418
Table
1-3) if the operating temperature exceeds 1 40° F (60°
1-3).
and observe all safety precautions. Daniel 3410
model). Daniel 3410 Series Gas
Installation manual
DAN-20057315
model,
3410 Series
Installation manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Daniel 3418

Table of Contents