Emerson Daniel 3410 Series Installation Manual page 79

Installation manual
DAN-20057315
2. Hook the appropriate shroud over the pin, ensuring the transducer cabling is within
Model 3418 GUSM
Figure 3-24: Latch pin and Shroud recesses
A. Shroud pin on the meter body
the shroud. Care needs to be taken not to pinch the cables between the shroud
recesses and shroud as the shroud is fitted into place.
Once the shroud is snugly seated in these recesses it will hang on the pin for ease of
attaching its mating pair.
Electrical installation
June 2019
79