32
Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
—
3.3 Manual mode, operating by the handle
General warning
Verify the condition of power source
prior to manually transferring. Manual
operation may result in out-of-phase
transfer when both sources are
energized.
Mount the handle; turn the slide
switch to the Manual mode (Hand),
locate and remove the handle from
inside the ATS; Insert as shown in
the bottom figure.
For more information, see video:
Manual and automatic operation
- TruONE® ATS (https://youtu.be/
bosvSPVi2sM).
Manual
mode
1
—
Fig. 3.3 Manual mode: installing handle
2
3