ABB TruONE ATS Installation And Operating Instruction page 102

102 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
5.6.6.2 Access from the display /
Ekip Com EtherNet/IP
With modules energized the presence of
the modules on the module slot activates
additional menus on the display:
• To set the addressing of the modules.
• In order to display information on the
modules.
The following table illustrates the path
from the display, for setting the function
and addressing of the modules:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com EtherNet/IP
Force Static IP address
Static IP Address
Static Network Mask
Static Gateway addr
:
—
Table 5.24 The path for setting the function and addressing of the modules
of the Ekip Com EtherNet/IP -module from the display
Description
Off* Dynamic IP address.
On Static IP address.
Displayed with static IP Address enabled, it
must be selected in order to insert the IP
Address of the modules.
Displayed with static IP Address enabled, it
must be selected in order to insert the subnet
mask of the modules.
Displayed with static IP Address enabled, it
must be selected in the presence of multiple
subnets, in order to insert the IP Address of
the node to which the modules are connected.