Return To Automatic Mode, Operating By Hmi - ABB Zenith ZTS T Series Quick Start User Manual

ZTS: I - II
I-position
—
Fig. 10 Manual mode, operating by
handle, open transition I - II
II-position
—
Return to Automatic mode,
operating by HMI
When operating the automatic transfer
switch by HMI, turn the slide switch to
Automatic mode (AUTO). Remark! The
handle has to be standby slot (not in use)
before turning to automatic mode.
Notice
When the slide switch is moved to the AUTO
position, the ATS will enter auto mode after a
3 second delay.
2
1
—
Fig. 11 The operating handle must set back to standby
slot before moving to the automatic mode
3
Automatic
mode
17