Manual Operation Using The Handle - ABB OTM3200E4M230C-GE Installation And Operating Instructions Manual

M OTO R I Z E D S W I TC H - D I S C O N N E C TO R S , OT M 3 2 0 0 E4 M 2 3 0 C - G E
—

5.2 Manual operation using the handle

You can operate the motorized switch-disconnector manually by using the handle that is
included in the delivery.
To operate the motorized switch-disconnector manually:
1. Turn the Motor/Manual selector to the Manual (Man.) position, see Figure 5.5. The motor
operator is switched off and electrical operation is prevented.
1
Figure 5.5 Motor/Manual selection in the Man. position
2.
Attach the handle by pressing it to the switch panel until it clicks into place, see Figure 5.6.
You can attach the handle in both positions (I or 0).
2
Figure 5.6 Attaching the handle
3.
Operate the motorized switch-disconnector by turning the handle to the required position
(I or 0).
Electrical operation is prevented when the handle is attached to the switch panel.
M M
M
M
M a n . M a n .
M a n .
M M
M a n .
15