Ekip Com Profinet -Module - ABB TruONE ATS Installation And Operating Instruction

3 4 O X _ 3 0 - 1 6 0 0 r e v. B / 1 S C C 3 0 3 0 1 1 M 0 2 0 1

5.6.5 Ekip Com Profinet -module

The Ekip Com Profinet is a communica-
tion accessory module, that integrates
the automatic transfer switch in an indus-
trial remote supervision and control net-
work. The module is suitable for Level 3
and Level 4 controllers (LCD and touch
control interfaces) .
It can be connected to an Ethernet net-
work with a Profinet communication pro-
tocol, and allows you to:
• Connect the automatic transfer switch
to the network, with dialog
functionality.
• Provide the status information of the
automatic transfer switch (open,
closed).
—
Fig. 5.22 Ekip Com Profinet -module
Information
The module can only be connected to net-
works that meet all the necessary require-
ments for safety and prevention of unautho-
rized access (for example, the network of the
control system of an installation). It is the in-
staller's responsibility to ensure that all the
necessary safety measures are adopted (for
example, firewalls, and so on). It is recom-
mended to connect it only to dedicated Ether-
net networks, with the Profinet communica-
tion protocol. The module cannot be
connected to the Internet.
For the communication bus, a cable of
type Cat.6 S/FTP must be used (Cat.6
with S/FTP double shielding).
97