ABB TruONE ATS Installation And Operating Instruction page 92

92 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
5.6.3.3 Access from the display /
Ekip Com DeviceNet –module
With modules energized the presence of
the modules on the module slot activates
additional menus on the display.
The following table illustrates the path for
accessing the configuration parameters
of the modules from the display:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com DeviceNet
MAC address
Baudrate
:
—
Table 5.13 The path for accessing the configuration parameters of the Ekip Com DeviceNet -module from the display
The following table illustrates the path
from the display for accessing informa-
tion on the module:
About
:
Modules (Optional modules)
Ekip Com DeviceNet
SN
Version
:
—
Table 5.14 Information of Ekip Com
DeviceNet -module in HMI
1... 63, default 63*
125 kbit/s, 250 kbit/s*, 500 kbit/s
Description
Serial number
Software version
Description
Address to be assigned to the
modules. IMPORTANT: devices
connected to the same network
must have different addresses
Data transmission speed