ABB TruONE ATS Installation And Operating Instruction page 106

106 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
5.6.7.2 Access from the display
/ Ekip Com IEC 61850
With modules energized the presence of
the modules on the module slot activates
additional menus on the display:
• To set the addressing of the modules.
• In order to display information on the
modules.
The following table illustrates the path
from the display, for setting the function
and addressing of the modules:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com IEC 61850
Force Static IP address
SNTP client abilit.
Static IP Address
Static Network Mask
Static Gateway addr
SNTP Indir. Server
:
—
Table 5.28 The path for setting the function and addressing of the modules
of the Ekip Com IEC 61850 -module from the display
Description
Off* Dynamic IP address.
On Static IP address.
Off* Synchronism with the SNTP clock signal disabled.
On Synchronism with the SNTP clock signal enabled.
Displayed with static IP Address enabled, it must
be selected in order to insert the IP Address of the
modules.
Displayed with static IP Address enabled, it must
be selected in order to insert the subnet mask of
the modules.
Displayed with static IP Address enabled, it must
be selected in the presence of multiple subnets, in
order to insert the IP Address of the node to which
the modules are connected.
Displayed with SNTP client enabled. "On" has to be
selected to insert the IP address of the server with
whose SNTP clock signal the modules are to be
synchronised.