ABB TruONE ATS Installation And Operating Instruction page 134

134 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
—
8.4 Mounting of the handle and HMI
For more information of operating,
position indication and the selection of
the operating mode, see the Chapter 3.2
Operating and locking.
More information, see animation:
Manual and automatic operation -
TruONE® ATS (https://youtu.be/
bosvSPVi2sM).
General warning
Verify the condition of power source prior to
manually transferring. Manual operation may
result in out-of-phase transfer when both
sources are energized.
8.4.1 Manual mode; mounting of the
handle to operation position
Manual
mode
1
—
Fig. 8.11 Mounting the handle to the operating position;
turn the slide switch to the Manual mode (Hand), lift
the handle and place it to the operating position
2
3