Ekip Com Hub -Module - ABB TruONE ATS Installation And Operating Instruction

108 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N

5.6.8 Ekip Com Hub -module

Ekip Com Hub is a communication module
for cloud-based connectivity through the
ABB Ability Electrical Distribution Con-
TM
trol System (EDCS).
TruONE equipped with Ekip Com Hub can
establish the connection to ABB Ability
for the whole low-voltage power distribu-
tion panel. This dedicated cartridge-type
communication module just needs to be
inserted into the TruONE and connected
to the internet.
The module is suitable for Level 3 and
Level 4 controllers (LCD and touch control
interfaces) .
The Ekip Com Modbus RTU and Ekip Com
Modbus TCP modules can be configured
to support Ekip Com Hub in the collection
of data to send to cloud.
—
Fig. 5.28 Ekip Com Hub -module
Information
It is the customer's sole responsibility to pro-
vide and continuously ensure a secure con-
nection between Ekip Com Hub and customer
network or any other network (as the case
may be). The plant manager must establish
and maintain appropriate measures (such as
but not limited to the installation of firewalls,
application of authentication measures, en-
cryption of data, installation of antivirus pro-
grams, etc.) to protect the product, the net-
work, the customer system and interface
against any kind of security breaches, unau-
thorized access, interference, intrusion, loss
and/ or theft of data or information. ABB and
its affiliates are not liable for damages and/
or losses related to such security breaches,
unauthorized accesses, interference, intru-
sion, loss and/or theft of data or information.
For the communication bus, a cable of
type Cat.6 S/FTP must be used (Cat.6
with S/FTP double shielding).