ABB TruONE ATS Installation And Operating Instruction page 59

3 4 O X _ 3 0 - 1 6 0 0 r e v. B / 1 S C C 3 0 3 0 1 1 M 0 2 0 1
4.2.1.2 Main Menu
Overviews
Main Menu
—
Fig. 4.15 By touching on Start Menu lower left corner
-image you can move to the Main Menu page of
Operation, Parameters, Measurements, Settings, Test
and About, see the table below for the selections
Information
When you have changed the parameter, go
always back in the menu and confirm the
change always when asked.
Operation
Alarm Reset
Bypass Time Delay
Automatic Mode
HMI Control Keys (I, II)
Energy Counters
Analog Meters
Measures
TruONE ATS
Reset any active switch control alarms (open I failure, close I
failure, open II failure, close II failure)
Bypass any currently running time delay
On*
Off
Enabled*
Disabled
Reset energy values
Operation Parameters Measurements
Settings Test
Information
The default values are marked in the menu
tree by *-marking.
Automatic switch control mode
HMI control mode
59
About
TruONE ATS
*Default