ABB TruONE ATS Installation And Operating Instruction page 94

94 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
The following table illustrates the ports
used by the module:
Port Service
502/tcp Modbus TCP
80/tcp Server HTTP
319/udp IEEE 1588
320/udp
—
Table 5.15 Ports of Ekip Com Modbus TCP -module
5.6.4.1 Signallings
The following table illustrates the possi-
ble signals, and their meaning:
LED
Power LED, green
Link LED, green
Activity LED, yellow
—
Table 5.16 Indication / Ekip Com Modbus TCP -module
Link
Activity
—
Fig. 5.21 Signals of Ekip Com Modbus TCP -module
When the module is used as a Modbus TCP/IP communication module.
On, with two quick flashes per second
When the module is used as a Server HTTP.
When IEEE protocol 1588 is enabled
Indication
Off
On fixed Power supply and communication
communication with device absent.
Off Connection error (signal absent).
On, fixed
Off
On, flashing Activity present on the line (in
reception and/or transmission).
Notes
Description
Power supply absent.
with the device present.
Power supply present, and
Correct connection.
No activity on the line.