ABB TruONE ATS Installation And Operating Instruction page 135

3 4 O X _ 3 0 - 1 6 0 0 r e v. B / 1 S C C 3 0 3 0 1 1 M 0 2 0 1
8.4.2 Automatic mode; mounting of the
handle to standby slot
2
1
Information
When the slide switch is moved to the AUTO
position, the automatic control mode is acti-
vated after a three second delay.
More information, see animation:
Installation of ATS in the panel and HMI on
door - TruONE® ATS (https://youtu.be/
PnvjhCVWQak).
—
Fig. 8.12 Before moving to the Automatic mode, the
operating handle must set to its place. When the handle
is in its place properly, the slide switch will move to the
Locking mode automatically and the switch is allowed
to be padlocked, if needed. From the Locking mode the
slide switch can be moved to the Automatic mode
3
Automatic
mode
8.4.3 Mounting of the HMI
1
—
Fig. 8.13 Removing the HMI from the switch
135
2
3