ABB TruONE ATS Installation And Operating Instruction page 88

88 Tr u O N E ® AT S , I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N
5.6.2.3 Access from the display
/ Ekip Com Profibus DP -module
With modules energized the presence of
the modules on the module slot activates
additional menus on the display.
The following table illustrates the path for
accessing the configuration parameters
of the modules from the display:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com Profibus DP
Serial address
:
—
Table 5.10 Configuration of Ekip Com Profibus DP -module in HMI
The following table illustrates the path
from the display for accessing informa-
tion on the module:
About
:
Modules (Optional modules)
Ekip Com Profibus DP -module
SN
Version
:
—
Table 5.11 Information of Ekip Com Profibus DP -module in HMI
1...125, default 125*
Description
Address to be assigned to the modules.
IMPORTANT: devices connected to the same
network must have different addresses
Description
Serial number
Software version