ABB TruONE ATS Installation And Operating Instruction page 3

—
Receiving, handling and storage
Warning
HAZARD OF EQUIPMENT
OVERTURNING
When moving with a fork lift, do not re-
move the shipping package until the de-
vice is in its final location.
Failure to follow this instruction will
result in personal injury or equipment
damage.
Receiving and handling
Upon receipt, carefully inspect the switch
for damage that may have occurred
during transit. If damage is evident, or
there is visible indication of rough han-
dling, immediately file a damage claim
with the transportation company, and no-
tify your local ABB sales office.
Do not remove the shipping package until
ready to install the switch.
Storage
If the unit will not be placed into service
immediately, store the switch on its origi-
nal package in a clean, dry location. To
prevent condensation, maintain a uniform
temperature. Store the unit in a tempera-
ture controlled building, allowing ade-
quate air circulation and protection from
dirt and moisture. Storing the unit out-
doors could cause harmful condensation
inside the switch enclosure.