Electrical Connections - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Assembly
4.4
The cable shields are connected to the connector housings. The connector housings are in contact with the
controller housing.
Perform all electrical connections only in the switched-off state.
CAUTION
> Injury hazard from high voltage
1
3
Fig. 5 Connector location on
colorSENSOR CFO200
1
2
3
4
colorSENSOR CFO

Electrical Connections

SYS = System (Power/PLC)
ETH = Ethernet
I/O = Digital I/O (PLC), CFO200 only
USB, CFO200 only
2
4
Fig. 6 Electrical connections on
colorSENSOR CFO200
Power supply, switching outputs, switching inputs,
RS232
Connection to PC
Switching inputs and outputs
USB process interface
Page 19