MICRO-EPSILON colorSENSOR CFO Series Instruction Manual page 66

Operation
Recognition
Profile
Automatic
Level Adjustment
White reference
Fields with gray
background re-
quire a selection.
Fields with dark
Value
border require
entry of a value.
colorSENSOR CFO
Name
Accept
Color space
CIE L*a*b*, CIE L*u'v',
CIE L*u*v*, CIE xyY, CIE
XYZ
Output circuit
Binary coded for CFO100
OUT0...OUT2, for
CFO200 OUT0...OUT7
Measuring Numerical value for
frequency CFO100 between
1...10,000, for CFO200
1...20,000
Lighting LED
Switch on
Switch off
Remeasure
level
Current Own / factory
White refer-
ence
Set
Reset
Defines name of recognition profile. The
maximum name length is 64 characters and
may consist of only alphanumerical characters
(a-z, A-Z, 0-9, no foreign character attributes),
spaces and the special characters +-#,.().
Selection of color space to be used for recog-
nition.
Defines outputs to be switched for the state "
Color not detected" (green is set to high).
This setting makes it possible to define a mini-
mum measuring rate.
Defines whether illumination LED is to be
check mark
switched on or off during automatic level
no
adjustment. (Required to test primary light
check mark
sources.)
Starts automatic level adjustment for illumina-
tion LED. Averaging is accomplished using
a maximum of 200 values depending on the
measuring frequency.
Overwrites the factory setting for the white
reference, during this process the white
reference should be located in the measuring
position.
Sets the white reference back to the factory
setting.
Page 66