A 2 Factory Settings - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Anhang | Factory Settings
A 2
Parameter name
IP address
Light source
Exposure mode
Measuring frequency
Triggering
Primarily used interface
Measuring program
Switching output Color not
recognized
Color database
Reading averaging
Color space
Color tolerance space
Color tolerance stage
Operating mode following system
start
colorSENSOR CFO
Factory Settings
Value
169.254.168.150
LED on
AC
1000 Hz
None, controller starts data transfer
after configuration of output signals,
as well as selection of interface or after diagram is called in browser.
Web Diagram, Color OUT (SYS, Digital I/O)
Color test
All outputs to high
Default data, deletes all learned colors
Automatic depending on measuring frequency using max. 200 values
Lab
Cylinder (∆L, ∆ab)
4 (∆L = 8.0; ∆ab = 4.0)
Ethernet
Page 94