Optical Fiber, Sensor Cable - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Assembly
4.5
Fig. 13 Optical fiber connector on sensor
i
Keep the end surfaces of the optical fiber cable free of dust, avoid any damage or soiling, e.g. by touching
NOTICE
with fingers. This also applies for the plug connector on the sensor.
> Error-free recognition of colors no longer guaranteed
> Incorrect measurements
> Damage to optical fiber
i
colorSENSOR CFO

Optical Fiber, Sensor Cable

Plug the optical fiber into the optical fiber connector on sensor.
The coding for the optical fiber connection (FA) is located on the illumination LED.
For this reason clean soiled end surfaces with pure alcohol and clean, lint-free microfiber cloth.
Fig. 14 Installation of optical fiber cable
Page 28